Board

ESP32-S2 Reverse TFT Feather specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

30 pins
Pin names in firmware (30 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON, BOOT0, D0
GPIO1D1
GPIO2D2
GPIO3SDA, D3
GPIO4SCL, D4
GPIO5D5
GPIO6D6
GPIO7TFT_I2C_POWER
GPIO8A5, D8
GPIO9D9
GPIO10D10
GPIO11D11
GPIO12D12
GPIO13LED, D13, L
GPIO14A4, D14
GPIO15A3, D15
GPIO16A2, D16
GPIO17A1, D17
GPIO18A0, D18
GPIO21NEOPIXEL_POWER
GPIO33NEOPIXEL
GPIO35MOSI, D35
GPIO36SCK, D36
GPIO37MISO, D37
GPIO38RX, D38
GPIO39TX, D39
GPIO40TFT_DC
GPIO41TFT_RESET
GPIO42TFT_CS
GPIO45TFT_BACKLIGHT

Sources

2 sources
  1. CircuitPython board definition (adafruit_feather_esp32s2_reverse_tft) at 83b54473a1
  2. CircuitPython pin definitions (adafruit_feather_esp32s2_reverse_tft) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake