FunHouse - WiFi Home Automation Development Board specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (28 pins)
| Chip pin | Board names |
|---|---|
| GPIO1 | A2 |
| GPIO2 | A1 |
| GPIO3 | BUTTON_DOWN |
| GPIO4 | BUTTON_SELECT |
| GPIO5 | BUTTON_UP |
| GPIO6 | CAP6 |
| GPIO7 | CAP7 |
| GPIO8 | CAP8 |
| GPIO9 | CAP9 |
| GPIO10 | CAP10 |
| GPIO11 | CAP11 |
| GPIO12 | CAP12 |
| GPIO13 | CAP13 |
| GPIO14 | DOTSTAR_DATA |
| GPIO15 | DOTSTAR_CLOCK |
| GPIO16 | PIR_SENSE |
| GPIO17 | A0 |
| GPIO18 | LIGHT |
| GPIO21 | TFT_BACKLIGHT |
| GPIO33 | SCL |
| GPIO34 | SDA |
| GPIO35 | TFT_MOSI |
| GPIO36 | TFT_SCK |
| GPIO37 | LED |
| GPIO39 | TFT_DC |
| GPIO40 | TFT_CS |
| GPIO41 | TFT_RESET |
| GPIO42 | SPEAKER |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.