PyRuler specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (16 pins)
| Chip pin | Board names |
|---|---|
| PA00 | APA102_MOSI, DOTSTAR_DATA |
| PA01 | APA102_SCK, DOTSTAR_CLOCK |
| PA02 | D1, A0 |
| PA03 | CAP3 |
| PA04 | CAP2 |
| PA05 | CAP1 |
| PA06 | D4, A2, TX, MOSI |
| PA07 | D3, A3, RX, SCK |
| PA08 | D0, A4, SDA |
| PA09 | D2, A1, SCL, MISO |
| PA10 | LED, D13 |
| PA11 | CAP0 |
| PA14 | LED5 |
| PA15 | LED4 |
| PA27 | LED7 |
| PA28 | LED6 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.