Board

ATMegaZero ESP32-S2 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

27 pins
Pin names in firmware (27 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0, PD5, SD_CS
GPIO1IO1, D5
GPIO2IO2, D6
GPIO3IO3, A5
GPIO4IO4, D7
GPIO5IO5, HWD
GPIO6IO6, A4
GPIO7IO7, D9
GPIO8IO8, D2, SDA
GPIO9IO9, D3, SCL
GPIO10IO10, D12
GPIO11IO11, D13
GPIO12IO12, A3
GPIO13IO13, A2
GPIO14IO14, AREF
GPIO17IO17, A0, DAC1
GPIO18IO18, A1, DAC2
GPIO21IO21, D10
GPIO33IO33, D4
GPIO34IO34, D8
GPIO35IO35, D14, MOSI
GPIO36IO36, D15, SCK
GPIO37IO37, D16, MISO
GPIO38IO38, D11
GPIO40IO40, NEOPIXEL
GPIO43IO43, D1, TX
GPIO44IO44, D2, RX

Sources

2 sources
  1. CircuitPython board definition (atmegazero_esp32s2) at 83b54473a1
  2. CircuitPython pin definitions (atmegazero_esp32s2) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake