Omnimo nRF52840 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (38 pins)
| Chip pin | Board names |
|---|---|
| P0_02 | A4 |
| P0_03 | A5 |
| P0_04 | A0, PMOD4 |
| P0_05 | A1, PMOD3 |
| P0_06 | QWIIC_SCL |
| P0_07 | D6, mikroBUS_RX |
| P0_08 | QWIIC_SDA |
| P0_09 | NFC1 |
| P0_10 | NFC2 |
| P0_11 | SCL, mikroBUS_SCL |
| P0_12 | SDA, mikroBUS_SDA |
| P0_13 | MOSI, mikroBUS_RST |
| P0_14 | SCK |
| P0_15 | MISO, mikroBUS_CS |
| P0_16 | NEOPIXEL |
| P0_24 | RX, mikroBUS_SCK |
| P0_25 | TX, mikroBUS_MISO |
| P0_26 | D9, mikroBUS_INT |
| P0_27 | D10, mikroBUS_PWM |
| P0_28 | A3, PMOD1 |
| P0_29 | VOLTAGE_MONITOR, A6, BATTERY |
| P0_30 | A2, PMOD2 |
| P0_31 | A7, mikroBUS_AN |
| P1_01 | PMOD6 |
| P1_02 | SWITCH, BTN1 |
| P1_03 | PMOD7 |
| P1_04 | VOUTEN |
| P1_05 | PMOD8 |
| P1_06 | D43 |
| P1_07 | BTN2 |
| P1_08 | D5, mikroBUS_TX |
| P1_09 | D2 |
| P1_10 | LED1, L, LED, RED_LED, D3 |
| P1_11 | PMOD5 |
| P1_12 | D13 |
| P1_13 | D12 |
| P1_14 | D11 |
| P1_15 | LED2, BLUE_LED |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.