Bast Pro Mini M0 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (21 pins)
| Chip pin | Board names |
|---|---|
| PA00 | D0, TX |
| PA01 | RX, D1 |
| PA02 | A0 |
| PA04 | A1 |
| PA05 | A2 |
| PA06 | D8 |
| PA07 | D9 |
| PA08 | A4, SDA |
| PA09 | A5, SCL |
| PA10 | A3 |
| PA11 | LED |
| PA14 | D2 |
| PA15 | D5 |
| PA16 | D11, MOSI |
| PA17 | D13, SCK |
| PA18 | D10 |
| PA19 | D12, MISO |
| PA22 | D4 |
| PA23 | D3 |
| PA27 | D6 |
| PA28 | D7 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.