Espruino Bangle.js v2 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (27 pins)
| Chip pin | Board names |
|---|---|
| P0_02 | PRESSURE_SCL |
| P0_03 | VOLTAGE_MONITOR |
| P0_05 | MEMLCD_CS |
| P0_06 | MEMLCD_EXTCOMIN |
| P0_07 | MEMLCD_DISP |
| P0_08 | BACKLIGHT |
| P0_17 | BUTTON |
| P0_19 | VIBRATE |
| P0_21 | HRM_POWER |
| P0_22 | HRM_INT |
| P0_23 | CHARGE_PORT |
| P0_24 | HRM_SDA |
| P0_25 | CHARGE_COMPLETE |
| P0_26 | MEMLCD_SCK |
| P0_27 | MEMLCD_MOSI |
| P0_29 | GPS_POWER |
| P0_30 | GPS_TX |
| P0_31 | GPS_RX |
| P1_00 | HRM_SCL |
| P1_01 | TOUCH_SDA |
| P1_02 | TOUCH_SCL |
| P1_03 | TOUCH_INT |
| P1_04 | ACCEL_SDA |
| P1_05 | ACCEL_SCL |
| P1_10 | COMPASS_SDA |
| P1_11 | COMPASS_SCL |
| P1_13 | PRESSURE_SDA |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.