Board

Flipper Zero WiFi Dev specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

33 pins
Pin names in firmware (33 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0
GPIO1IO1, SCL, ADC1_CH0
GPIO2IO2, SDA, ADC1_CH1
GPIO3IO3, ADC1_CH2
GPIO4IO4, BLUE_LED, ADC1_CH3
GPIO5IO5, GREEN_LED, ADC1_CH4
GPIO6IO6, RED_LED, ADC1_CH5
GPIO7IO7, ADC1_CH6
GPIO8IO8, ADC1_CH7
GPIO9IO9, ADC1_CH8
GPIO10IO10, ADC1_CH9
GPIO11IO11, MOSI
GPIO12IO12, SCK
GPIO13IO13, MISO
GPIO14IO14
GPIO15IO15
GPIO16IO16
GPIO17IO17, DAC1
GPIO18IO18, DAC2
GPIO21IO21
GPIO26IO26
GPIO33IO33
GPIO34IO34
GPIO35IO35
GPIO36IO36
GPIO37IO37
GPIO38IO38
GPIO39IO39
GPIO40IO40
GPIO41IO41
GPIO42IO42
GPIO43TX
GPIO44RX

Sources

2 sources
  1. CircuitPython board definition (flipperzero_wifi_dev) at 83b54473a1
  2. CircuitPython pin definitions (flipperzero_wifi_dev) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake