HexKy S2 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (28 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BOOT |
| GPIO1 | A0 |
| GPIO2 | A2 |
| GPIO3 | A1 |
| GPIO4 | D4 |
| GPIO5 | D2 |
| GPIO6 | D3 |
| GPIO7 | A3 |
| GPIO8 | SDA |
| GPIO9 | SCL |
| GPIO10 | D6, D8 |
| GPIO11 | D5 |
| GPIO12 | D7 |
| GPIO13 | VBAT_SENSE |
| GPIO17 | A4, DAC1 |
| GPIO18 | A5, DAC2 |
| GPIO21 | SW1 |
| GPIO33 | TFT_CS |
| GPIO34 | TFT_DC |
| GPIO35 | MOSI |
| GPIO36 | SCK |
| GPIO37 | MISO |
| GPIO39 | D13_LED |
| GPIO40 | NEOPIXEL |
| GPIO41 | TFT_RST |
| GPIO42 | SW2 |
| GPIO43 | TX |
| GPIO44 | RX |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.