Board

Cucumber MS specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

37 pins
Pin names in firmware (37 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0
GPIO1IO1
GPIO2IO2, LED_INVERTED, LED
GPIO3IO3
GPIO4IO4
GPIO5IO5
GPIO6IO6
GPIO7IO7
GPIO8IO8
GPIO9IO9
GPIO10IO10
GPIO11IO11
GPIO12IO12
GPIO13IO13
GPIO14IO14
GPIO15IO15
GPIO16IO16
GPIO17IO17
GPIO18IO18, NEOPIXEL
GPIO19IO19
GPIO20IO20
GPIO21IO21
GPIO26IO26
GPIO33IO33
GPIO34IO34
GPIO35IO35
GPIO36IO36
GPIO37IO37
GPIO38IO38
GPIO39IO39
GPIO40IO40, SDA
GPIO41IO41, SCL
GPIO42IO42
GPIO43TX, IO43
GPIO44RX, IO44
GPIO45IO45
GPIO46IO46

Sources

2 sources
  1. CircuitPython board definition (gravitech_cucumber_ms) at 83b54473a1
  2. CircuitPython pin definitions (gravitech_cucumber_ms) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake