Board

HiiBot BlueFi specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

41 pins
Pin names in firmware (41 pins)
From the firmware’s board definition[2]
Chip pinBoard names
P0_00P19, D19, SCL
P0_01P16, D16
P0_02P1, D1, A1, TX
P0_03P4, D4, A4
P0_04P14, D14, A5, MISO
P0_05P25, D25, TFT_CS
P0_06P13, D13, SCK
P0_07P23, D23, TFT_SCK
P0_08P6, D6
P0_09P21, D21, MICROPHONE_CLOCK
P0_10P22, D22, MICROPHONE_DATA
P0_11P41, D41, SENSORS_SCL
P0_12P42, D42, SENSORS_SDA
P0_13P40, D40, WIFI_PWR
P0_14P43, D43, IMU_IRQ, ACCELEROMETER_INTERRUPT
P0_15P37, D37, WIFI_BUSY
P0_16P12, D12
P0_17P35, D35, WIFI_MISO
P0_19P10, D10
P0_20P36, D36, WIFI_MOSI
P0_21P9, D9
P0_22P34, D34, WIFI_SCK
P0_23P8, D8
P0_24P38, D38, WIFI_CS
P0_25P7, D7
P0_26P15, D15, MOSI
P0_27P26, D26, TFT_DC
P0_28P0, D0, A0, RX
P0_29P2, D2, A2
P0_30P3, D3, A3
P0_31P20, D20, A6, SDA
P1_00P39, D39, WIFI_RESET
P1_07P5, D5, BUTTON_A
P1_08P24, D24, TFT_MOSI
P1_09P11, D11, BUTTON_B
P1_10P18, D18, NEOPIXEL
P1_11P45, D45, SPEAKER_ENABLE
P1_12P17, D17, LED, REDLED
P1_13P27, D27, TFT_RESET, TFT_BACKLIGHT
P1_14P44, D44, WHITELED
P1_15P46, D46, SPEAKER, AUDIO

Sources

2 sources
  1. CircuitPython board definition (hiibot_bluefi) at 83b54473a1
  2. CircuitPython pin definitions (hiibot_bluefi) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake