Challenger+ RP2350 WiFi6 BLE5 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (30 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | GP0 |
| GPIO1 | GP1 |
| GPIO2 | GP2 |
| GPIO3 | GP3 |
| GPIO4 | GP4, ESP_TX |
| GPIO5 | GP5, ESP_RX |
| GPIO6 | GP6 |
| GPIO7 | GP7, LED |
| GPIO8 | GP8, ESP_MISO |
| GPIO9 | GP9, ESP_CS |
| GPIO10 | GP10, ESP_SCK |
| GPIO11 | GP11, ESP_MOSI |
| GPIO12 | GP12, TX |
| GPIO13 | GP13, RX |
| GPIO14 | GP14, ESP_BOOT, ESP_DRDY |
| GPIO15 | GP15, ESP_RESET |
| GPIO16 | GP16, MISO |
| GPIO17 | GP17, SS |
| GPIO18 | GP18, SCK |
| GPIO19 | GP19, MOSI |
| GPIO20 | GP20, SDA |
| GPIO21 | GP21, SCL |
| GPIO22 | GP22, ESP_HS |
| GPIO23 | GP23 |
| GPIO24 | GP24 |
| GPIO25 | GP25 |
| GPIO26 | GP26, A3 |
| GPIO27 | GP27, A2 |
| GPIO28 | GP28, A1 |
| GPIO29 | GP29, A0 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.