BlueMicro840 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (45 pins)
| Chip pin | Board names |
|---|---|
| P0_02 | P0_02, A0 |
| P0_03 | P0_03, A1 |
| P0_04 | P0_04, A2 |
| P0_05 | P0_05, A3 |
| P0_06 | P0_06, TX |
| P0_07 | P0_07 |
| P0_08 | P0_08, RX |
| P0_09 | P0_09, MISO |
| P0_10 | P0_10, MOSI |
| P0_11 | P0_11 |
| P0_12 | P0_12, VCC_ON |
| P0_13 | P0_13 |
| P0_14 | P0_14 |
| P0_15 | P0_15, SDA |
| P0_16 | P0_16 |
| P0_17 | P0_17, SCL |
| P0_19 | P0_19 |
| P0_20 | P0_20 |
| P0_21 | P0_21 |
| P0_22 | P0_22 |
| P0_23 | P0_23 |
| P0_24 | P0_24, SCK |
| P0_25 | P0_25 |
| P0_26 | P0_26 |
| P0_27 | P0_27 |
| P0_28 | P0_28, A4 |
| P0_29 | P0_29, A5 |
| P0_30 | P0_30, A6 |
| P0_31 | P0_31, A7, VOLTAGE_MONITOR, BATTERY |
| P1_00 | P1_00 |
| P1_01 | P1_01 |
| P1_02 | P1_02 |
| P1_03 | P1_03 |
| P1_04 | P1_04, LED1, RED_LED |
| P1_05 | P1_05 |
| P1_06 | P1_06 |
| P1_07 | P1_07 |
| P1_08 | P1_08 |
| P1_09 | P1_09 |
| P1_10 | P1_10, LED2, BLUE_LED |
| P1_11 | P1_11 |
| P1_12 | P1_12 |
| P1_13 | P1_13 |
| P1_14 | P1_14 |
| P1_15 | P1_15 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.