Snekboard specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (17 pins)
| Chip pin | Board names |
|---|---|
| PA06 | A3 |
| PA07 | A4 |
| PA08 | A5, SCL |
| PA09 | A6, SDA |
| PA10 | A7 |
| PA11 | A8 |
| PA12 | POWER1 |
| PA13 | POWER2 |
| PA16 | DIR1 |
| PA17 | DIR2 |
| PA18 | POWER3 |
| PA19 | POWER4 |
| PA20 | DIR3 |
| PA21 | DIR4 |
| PB08 | A1, RX |
| PB09 | A2, TX |
| PB11 | NEOPIXEL |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.