M5Stamp C3 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (15 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | G0, IO0 |
| GPIO1 | G1, IO1 |
| GPIO2 | NEOPIXEL, G2, IO2 |
| GPIO3 | BUTTON, G3, IO3 |
| GPIO4 | G4, IO4 |
| GPIO5 | G5, IO5 |
| GPIO6 | G6, IO6 |
| GPIO7 | G7, IO7 |
| GPIO8 | G8, IO8 |
| GPIO9 | G9, IO9 |
| GPIO10 | G10, IO10 |
| GPIO18 | G18, IO18 |
| GPIO19 | G19, IO19 |
| GPIO20 | RX, G20, IO20 |
| GPIO21 | TX, G21, IO21 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.