M5Stack Tab5 IoT Development Kit specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (47 pins)
| Chip pin | Board names |
|---|---|
| GPIO2 | G2 |
| GPIO3 | G3 |
| GPIO4 | G4 |
| GPIO5 | G5, SCK |
| GPIO6 | G6 |
| GPIO7 | G7 |
| GPIO8 | G8, C6_SDIO2_D3 |
| GPIO9 | G9, C6_SDIO2_D2 |
| GPIO10 | G10, C6_SDIO2_D1 |
| GPIO11 | G11, C6_SDIO2_D0 |
| GPIO12 | G12, C6_SDIO2_CK |
| GPIO13 | G13, C6_SDIO2_CMD |
| GPIO14 | G14, C6_IO2 |
| GPIO15 | G15, C6_RESET |
| GPIO16 | G16 |
| GPIO17 | G17 |
| GPIO18 | G18, MOSI |
| GPIO19 | G19, MISO |
| GPIO20 | G20, RS485_TX |
| GPIO21 | G21, RS485_RX |
| GPIO22 | G22, LCD_BL |
| GPIO23 | G23, TP_INT |
| GPIO26 | G26, I2S_DSDIN |
| GPIO27 | G27, I2S_SCLK |
| GPIO28 | G28, I2S_ASDOUT |
| GPIO29 | G29, I2S_LRCK |
| GPIO30 | G30, I2S_MCLK |
| GPIO31 | G31, SDA |
| GPIO32 | G32, SCL |
| GPIO34 | G34, RS485_DIR |
| GPIO35 | G35 |
| GPIO36 | G36, CAM_MCLK |
| GPIO37 | G37, TX, TXD0 |
| GPIO38 | G38, RX, RXD0 |
| GPIO39 | G39, SD_DAT0, SD_MISO |
| GPIO40 | G40, SD_DAT1 |
| GPIO41 | G41, SD_DAT2 |
| GPIO42 | G42, SD_DAT3, SD_CS |
| GPIO43 | G43, SD_CLK, SD_SCK |
| GPIO44 | G44, SD_CMD, SD_MOSI |
| GPIO45 | G45 |
| GPIO47 | G47 |
| GPIO48 | G48 |
| GPIO51 | G51 |
| GPIO52 | G52 |
| GPIO53 | G53, PORTA_Y |
| GPIO54 | G54, PORTA_W |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.