nRF52840 DK (PCA10056) specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (48 pins)
| Chip pin | Board names |
|---|---|
| P0_00 | P0_00 |
| P0_01 | P0_01 |
| P0_02 | P0_02 |
| P0_03 | P0_03, A0 |
| P0_04 | P0_04, A1 |
| P0_05 | P0_05 |
| P0_06 | P0_06 |
| P0_07 | P0_07 |
| P0_08 | P0_08 |
| P0_09 | P0_09 |
| P0_10 | P0_10 |
| P0_11 | P0_11, BUTTON1 |
| P0_12 | P0_12, BUTTON2 |
| P0_13 | P0_13, L, LED1 |
| P0_14 | P0_14, LED2 |
| P0_15 | P0_15, LED3 |
| P0_16 | P0_16, LED4 |
| P0_17 | P0_17 |
| P0_18 | P0_18 |
| P0_19 | P0_19 |
| P0_20 | P0_20 |
| P0_21 | P0_21 |
| P0_22 | P0_22 |
| P0_23 | P0_23 |
| P0_24 | P0_24, BUTTON3 |
| P0_25 | P0_25, BUTTON4 |
| P0_26 | P0_26, SDA |
| P0_27 | P0_27, SCL |
| P0_28 | P0_28, A2 |
| P0_29 | P0_29, A3 |
| P0_30 | P0_30, A4 |
| P0_31 | P0_31, A5 |
| P1_00 | P1_00 |
| P1_01 | P1_01, D0, RX |
| P1_02 | P1_02, D1, TX |
| P1_03 | P1_03, D2 |
| P1_04 | P1_04, D3 |
| P1_05 | P1_05, D4 |
| P1_06 | P1_06, D5 |
| P1_07 | P1_07, D6 |
| P1_08 | P1_08, D7 |
| P1_09 | P1_09 |
| P1_10 | P1_10, D8 |
| P1_11 | P1_11, D9 |
| P1_12 | P1_12, D10 |
| P1_13 | P1_13, D11, MOSI |
| P1_14 | P1_14, D12, MISO |
| P1_15 | P1_15, D13, SCK |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.