senseBox MCU specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (28 pins)
| Chip pin | Board names |
|---|---|
| PA02 | A6, D6 |
| PA03 | A5, D5 |
| PA04 | A1, D1 |
| PA05 | A2, D2 |
| PA06 | A3, D3 |
| PA07 | A4, D4 |
| PA08 | SDA |
| PA09 | SCL |
| PA10 | XB2_TX |
| PA11 | XB2_RX |
| PA14 | XB2_CS |
| PA15 | XB2_INT |
| PA16 | MOSI |
| PA17 | SCK |
| PA18 | XB1_CS |
| PA19 | MISO |
| PA20 | D0 |
| PA21 | XB1_INT |
| PA22 | D10, TX1, TX, XB1_TX |
| PA23 | D11, RX1, RX, XB1_RX |
| PA27 | D7, LED, RED_LED |
| PA28 | D8, GREEN_LED |
| PB02 | D9, UART_PWR |
| PB03 | XB1_PWR |
| PB08 | D12, TX2 |
| PB09 | D13, RX2 |
| PB10 | XB2_PWR |
| PB11 | I2C_PWR |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.