Board

senseBox MCU-S2 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

32 pins
Pin names in firmware (32 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON, BOOT0, D0
GPIO1D1, NEOPIXEL
GPIO2D2, A2
GPIO3D3, A3
GPIO4D4, A4
GPIO5D5, A5
GPIO6D6, A6
GPIO7D7, A7
GPIO8IO_POWER
GPIO9SD_POWER
GPIO10SD_CS
GPIO11SD_MOSI
GPIO12SD_SCLK
GPIO13SD_MISO
GPIO14PD_PIN
GPIO17XB_TX, RX1
GPIO18XB_RX, TX1
GPIO21PD_POWER
GPIO26UART_POWER
GPIO33XB_INT
GPIO34XB_CS
GPIO35XB_MOSI, MOSI, D35
GPIO36XB_SCLK, SCK, D36
GPIO37XB_MISO, MISO, D37
GPIO38XB_RESET, D38
GPIO39SDA, D39
GPIO40SCL
GPIO41XBEE_POWER
GPIO42SCL1
GPIO43TX
GPIO44RX
GPIO45SDA1

Sources

2 sources
  1. CircuitPython board definition (sensebox_mcu_esp32s2) at 83b54473a1
  2. CircuitPython pin definitions (sensebox_mcu_esp32s2) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake