MicroMod STM32 Processor specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (39 pins)
| Chip pin | Board names |
|---|---|
| PA00 | G2, BUS2 |
| PA01 | BATT_VIN3 |
| PA02 | UART_TX1, TX |
| PA03 | UART_RX1, RX |
| PA04 | SPI_CS, CS, AUD_LRCLK, I2S_WS, PCM_SYNC, PDM_DATA |
| PA05 | SPI_SCK, SCK, LED_CLK |
| PA06 | SPI_CIPO, SPI_MISO, CIPO, MISO |
| PA07 | SPI_COPI, SPI_MOSI, COPI, MOSI, LED_DAT |
| PA08 | G1, BUS1 |
| PA11 | USB_DM |
| PA12 | USB_DP |
| PA13 | SWDIO |
| PA14 | SWCLK |
| PA15 | LED |
| PB00 | A1 |
| PB01 | I2C_INT |
| PB03 | AUD_BCLK, I2S_SCK, PCM_CLK, PDM_CLK |
| PB04 | AUD_OUT, I2S_OUT, PCM_OUT, CAM_MCLK |
| PB05 | AUD_IN, I2S_IN, PCM_IN, CAM_PCLK |
| PB06 | I2C_SCL1 |
| PB07 | I2C_SDA1 |
| PB08 | CAN_RX |
| PB09 | CAN_TX |
| PB10 | I2C_SCL, SCL |
| PB11 | I2C_SDA, SDA |
| PB12 | G11, HOST_ID |
| PB13 | G10, ADC_DP, CAM_VSYNC, HOST_VBUS |
| PB14 | USBHOST_DM |
| PB15 | USBHOST_DP |
| PC00 | D0 |
| PC01 | D1, CAM_TRIG |
| PC02 | G6, BUS6 |
| PC05 | A0 |
| PC06 | PWM0 |
| PC07 | PWM1 |
| PC08 | G3, BUS3 |
| PC09 | G4, BUS4 |
| PC13 | G5, BUS5 |
| PD02 | G0, BUS0 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.