SparkFun SAMD51 Thing Plus specs, pinout & datasheets
- Chip / SoC
- ATSAMD51J20
- CPU
- Arm Cortex-M4
- Clock
- 120 MHz
Imported entry: generated from open-source board definitions (platformio, circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.
Can I still use it?
- Arduino framework
- Supported[1]Arduino framework available through PlatformIO.
- MicroPython
- Supported[3]
- CircuitPython
- Supported[2]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (21 pins)
| Chip pin | Board names |
|---|---|
| PA02 | A0 |
| PA04 | A3 |
| PA05 | A4 |
| PA06 | D4 |
| PA07 | D9 |
| PA12 | TX, D1 |
| PA13 | RX, D0 |
| PA15 | D5 |
| PA16 | D11 |
| PA17 | D13, LED |
| PA18 | D10 |
| PA19 | D12 |
| PA20 | D6 |
| PA22 | SDA, D20 |
| PA23 | SCL, D21 |
| PB02 | A5 |
| PB08 | A1 |
| PB09 | A2 |
| PB11 | MISO, D22 |
| PB12 | MOSI, D23 |
| PB13 | SCK, D24 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.