Spotpear ESP32C3 LCD 1.44 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (14 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | LCD_DC |
| GPIO1 | IO1 |
| GPIO2 | LCD_CS |
| GPIO3 | LCD_SCK |
| GPIO4 | LCD_MOSI |
| GPIO5 | LCD_RST |
| GPIO6 | IO6 |
| GPIO7 | IO7 |
| GPIO8 | BUTTON1 |
| GPIO9 | BOOT, BUTTON0 |
| GPIO10 | BUTTON2 |
| GPIO11 | LED |
| GPIO20 | RX, IO20 |
| GPIO21 | TX, IO21 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.