BLE-SS Dev Board Multi Sensor specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (20 pins)
| Chip pin | Board names |
|---|---|
| P0_02 | D2, A0, RX |
| P0_03 | D3, A1, TX |
| P0_04 | D4, LED2 |
| P0_05 | D5 |
| P0_06 | D6 |
| P0_07 | D7, LED1 |
| P0_08 | D8 |
| P0_09 | D9 |
| P0_10 | D10 |
| P0_12 | D12, BUTTON2 |
| P0_13 | MISO |
| P0_14 | MOSI |
| P0_15 | SCK |
| P0_23 | D23 |
| P0_24 | SDA |
| P0_26 | SCL |
| P0_28 | D28 |
| P0_29 | D29 |
| P0_30 | D30 |
| P0_31 | D31, BUTTON1 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.