SP-1 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (35 pins)
| Chip pin | Board names |
|---|---|
| P0_00 | LED_PLAY2 |
| P0_01 | LED_PLAY4 |
| P0_02 | LADDER1 |
| P0_03 | LADDER2 |
| P0_04 | FADER3 |
| P0_05 | FADER1 |
| P0_06 | EMMC_CLK |
| P0_07 | EMMC_DAT0 |
| P0_08 | EMMC_CMD |
| P0_09 | TAS_RESET |
| P0_10 | BT_RESET |
| P0_11 | I2S_LRCLK |
| P0_12 | I2S_BCLK |
| P0_13 | OSC_EN |
| P0_14 | EMMC_VCCQ |
| P0_15 | CS42_RESET |
| P0_21 | CHARGE_ENABLE |
| P0_22 | CHARGE_STATUS |
| P0_24 | POWER_GOOD |
| P0_26 | LED_TRACK2 |
| P0_27 | BUTTON |
| P0_28 | VBATT, BATTERY, VOLTAGE_MONITOR |
| P0_29 | LED_TRACK1 |
| P0_30 | FADER2 |
| P0_31 | FADER4 |
| P1_00 | CHARGE_ISET |
| P1_07 | SDA |
| P1_08 | EMMC_RESET |
| P1_09 | I2S_DOUT |
| P1_10 | LADDER_POWER |
| P1_11 | SCL |
| P1_12 | LED_PLAY3 |
| P1_13 | LED_PLAY1 |
| P1_14 | LED_TRACK4 |
| P1_15 | LED_TRACK3 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.