Board

TTGO T8 ESP32-S2 ST7789 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

36 pins
Pin names in firmware (36 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0
GPIO1IO1
GPIO2IO2
GPIO3IO3
GPIO4IO4
GPIO5IO5
GPIO6IO6
GPIO7IO7
GPIO8IO8
GPIO9IO9, BATTERY
GPIO10SD_CS
GPIO11IO11, SD_MOSI
GPIO12IO12, SD_CLK
GPIO13IO13, SD_MISO
GPIO14PE_POWER
GPIO15IO15
GPIO16IO16
GPIO17IO17, TX1
GPIO18IO18, RX1
GPIO19IO19
GPIO20IO20
GPIO21IO21
GPIO33LCD_BCKL
GPIO34LCD_CS
GPIO35LCD_MOSI
GPIO36LCD_CLK
GPIO37LCD_D_C
GPIO38LCD_RST
GPIO39IO39
GPIO40IO40
GPIO41IO41
GPIO42IO42
GPIO43TX
GPIO44RX
GPIO45IO45
GPIO46IO46

Sources

2 sources
  1. CircuitPython board definition (lilygo_ttgo_t8_s2_st7789) at 83b54473a1
  2. CircuitPython pin definitions (lilygo_ttgo_t8_s2_st7789) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake