Board

Unexpected Maker FeatherS2 Prerelease specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

26 pins
Pin names in firmware (26 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0, D4
GPIO1IO1, D5, A10
GPIO3IO3, D6, A9
GPIO4IO4, AMB
GPIO5IO5, A5, D19
GPIO6IO6, A4, D18
GPIO7IO7, D9, A8
GPIO8IO8, D10
GPIO9IO9, D11
GPIO10IO10, D12, A7
GPIO11IO11, D13, A6
GPIO12IO12, A3, D17
GPIO13LED
GPIO14IO14, A2, D16
GPIO17IO17, A0, D14
GPIO18IO18, A1, D15
GPIO21LDO2, IO21
GPIO33SDA, IO33, D20
GPIO35IO35, MOSI, D24
GPIO36IO36, SCK, D25
GPIO37IO37, MISO, D23
GPIO38SCL, IO38, D21
GPIO40APA102_MOSI
GPIO43IO43, D1, TX
GPIO44IO44, D0, RX
GPIO45APA102_SCK

Sources

2 sources
  1. CircuitPython board definition (unexpectedmaker_feathers2_prerelease) at 83b54473a1
  2. CircuitPython pin definitions (unexpectedmaker_feathers2_prerelease) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake