Unexpected Maker TinyS2 specs, pinout & datasheets
- Chip / SoC
- ESP32-S2
- Clock
- 240 MHz
Imported entry: generated from open-source board definitions (platformio, circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.
Can I still use it?
- Arduino framework
- Supported[1]Arduino framework available through PlatformIO.
- MicroPython
- Supported[3]
- CircuitPython
- Supported[2]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (21 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | IO0, D4 |
| GPIO1 | NEOPIXEL |
| GPIO2 | NEOPIXEL_POWER |
| GPIO3 | BATTERY, VBAT, VBAT_SENSE, VOLTAGE_MONITOR |
| GPIO4 | IO4, A9, D6 |
| GPIO5 | IO5, A5, D19 |
| GPIO6 | IO6, A4, D18 |
| GPIO7 | IO7, D9, A8 |
| GPIO8 | SDA, IO8, D10 |
| GPIO9 | SCL, IO9, D11 |
| GPIO14 | IO14, A2, D16 |
| GPIO17 | IO17, A0, D14, DAC1 |
| GPIO18 | IO18, A1, D15, DAC2 |
| GPIO21 | VBUS, VBUS_SENSE |
| GPIO33 | IO33, D20 |
| GPIO35 | IO35, MOSI, SDO, D24 |
| GPIO36 | IO36, MISO, SDI, D25 |
| GPIO37 | IO37, SCK, D23 |
| GPIO38 | IO38, D21 |
| GPIO43 | IO43, D1, TX |
| GPIO44 | IO44, D0, RX |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.