WEMOS LOLIN S2 Mini specs, pinout & datasheets
- Chip / SoC
- ESP32-S2
- Clock
- 240 MHz
Imported entry: generated from open-source board definitions (platformio, circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.
Can I still use it?
- Arduino framework
- Supported[1]Arduino framework available through PlatformIO.
- MicroPython
- Supported[3]
- CircuitPython
- Supported[2]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (34 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON, IO0 |
| GPIO1 | IO1 |
| GPIO2 | IO2 |
| GPIO3 | IO3, A0 |
| GPIO4 | IO4 |
| GPIO5 | IO5, D0 |
| GPIO6 | IO6 |
| GPIO7 | IO7, SCK, D5 |
| GPIO8 | IO8 |
| GPIO9 | IO9, MISO, D6 |
| GPIO10 | IO10 |
| GPIO11 | IO11, MOSI, D7 |
| GPIO12 | IO12 |
| GPIO13 | IO13, D8 |
| GPIO14 | IO14 |
| GPIO15 | LED, IO15 |
| GPIO16 | IO16, D4 |
| GPIO17 | IO17 |
| GPIO18 | IO18, D3 |
| GPIO21 | IO21 |
| GPIO33 | IO33, SDA, D2 |
| GPIO34 | IO34 |
| GPIO35 | IO35, SCL, D1 |
| GPIO36 | IO36 |
| GPIO37 | IO37 |
| GPIO38 | IO38 |
| GPIO39 | IO39 |
| GPIO40 | IO40 |
| GPIO41 | IO41 |
| GPIO42 | IO42 |
| GPIO43 | TX, IO43 |
| GPIO44 | RX, IO44 |
| GPIO45 | IO45 |
| GPIO46 | IO46 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.