Xteink X4 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (13 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | A0 |
| GPIO1 | A1, BUTTON_ADC_1 |
| GPIO2 | A2, BUTTON_ADC_2 |
| GPIO3 | BUTTON, BOOT0 |
| GPIO4 | EPD_DC |
| GPIO5 | EPD_RESET |
| GPIO6 | EPD_BUSY |
| GPIO7 | MISO, SD_MISO |
| GPIO8 | SCK, EPD_SCK, D8 |
| GPIO10 | MOSI, EPD_MOSI, D10 |
| GPIO12 | SD_CS |
| GPIO20 | RX, D20 |
| GPIO21 | EPD_CS |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.