Board

Feather ESP32-C6 4MB Flash No PSRAM specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

20 pins
Pin names in firmware (20 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0, D11
GPIO1A0, IO1
GPIO2A5, IO2
GPIO3A4, IO3
GPIO4A1, IO4
GPIO5A3, IO5, D5
GPIO6A2, IO6, D6
GPIO7IO7, D9
GPIO8IO8, D10
GPIO9BUTTON, NEOPIXEL, IO9
GPIO14IO14, D12
GPIO15LED, IO15, D13
GPIO16TX, IO16
GPIO17RX, IO17
GPIO18SCL, IO18
GPIO19SDA, IO19
GPIO20NEOPIXEL_I2C_POWER
GPIO21SCK, IO21
GPIO22MOSI, IO22
GPIO23MISO, IO23

Sources

2 sources
  1. CircuitPython board definition (adafruit_feather_esp32c6_4mbflash_nopsram) at 83b54473a1
  2. CircuitPython pin definitions (adafruit_feather_esp32c6_4mbflash_nopsram) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake