Board

Adafruit Feather ESP32 V2 (HUZZAH32 V2) specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

25 pins
Pin names in firmware (25 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0NEOPIXEL
GPIO2NEOPIXEL_I2C_POWER
GPIO4A5, D4
GPIO5SCK, D5
GPIO7RX, D7
GPIO8TX, D8
GPIO12D12, A11
GPIO13LED, L, D13, A12
GPIO14D14, A6
GPIO15D15, A8
GPIO19MOSI, D19
GPIO20SCL, D20
GPIO21MISO, D21
GPIO22SDA, D22
GPIO25A1, D25
GPIO26A0, D26
GPIO27D27, A10
GPIO32D32, A7
GPIO33D33, A9
GPIO34A2, D34
GPIO35D35, VOLTAGE_MONITOR
GPIO36A4, D36
GPIO37D37
GPIO38BUTTON, SW38
GPIO39A3, D39

Sources

2 sources
  1. CircuitPython board definition (adafruit_feather_esp32_v2) at 83b54473a1
  2. CircuitPython pin definitions (adafruit_feather_esp32_v2) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake