Adafruit Feather HUZZAH32 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (23 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | NEOPIXEL |
| GPIO4 | A5, D4 |
| GPIO5 | SCK, D5 |
| GPIO12 | D12, A11 |
| GPIO13 | LED, D13, A12 |
| GPIO14 | D14, A6 |
| GPIO15 | D15, A8 |
| GPIO16 | RX, D16 |
| GPIO17 | TX, D17 |
| GPIO18 | MOSI, D18 |
| GPIO19 | MISO, D19 |
| GPIO21 | D21 |
| GPIO22 | SCL, D22 |
| GPIO23 | SDA, D23 |
| GPIO25 | A1, D25 |
| GPIO26 | A0, D26 |
| GPIO27 | D27, A10 |
| GPIO32 | D32, A7 |
| GPIO33 | D33, A9 |
| GPIO34 | A2, D34 |
| GPIO35 | D35, VOLTAGE_MONITOR |
| GPIO36 | A4, D36 |
| GPIO39 | A3, D39 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.