Adafruit Feather M4 Express specs, pinout & datasheets
- Chip / SoC
- ATSAMD51J19
- CPU
- Arm Cortex-M4
- Clock
- 120 MHz
- RAM
- 192 KB
- Flash
- 512 KB
Imported entry: generated from open-source board definitions (platformio, zephyr, circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
- Chip / SoC
- ATSAMD51J19[1]
- CPU
- Arm Cortex-M4[1]
- Clock
- 120 MHz[1]
- RAM
- 192 KB[2]
- Flash
- 512 KB[2]
- Upload limits
- 512 KB flash, 192 KB RAM[1]
Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.
Can I still use it?
- Arduino framework
- Supported[1]Arduino framework available through PlatformIO.
- MicroPython
- Supported[4]
- CircuitPython
- Supported[3]
- Zephyr RTOS
- Supported[2]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (23 pins)
| Chip pin | Board names |
|---|---|
| PA02 | A0, D14 |
| PA04 | A4, D18 |
| PA05 | A1, D15 |
| PA06 | A5, D19 |
| PA12 | SDA |
| PA13 | SCL |
| PA14 | D4 |
| PA16 | D5 |
| PA17 | SCK, D25 |
| PA18 | D6 |
| PA19 | D9 |
| PA20 | D10 |
| PA21 | D11 |
| PA22 | D12 |
| PA23 | LED, D13 |
| PB01 | VOLTAGE_MONITOR, BATTERY |
| PB03 | NEOPIXEL |
| PB08 | A2, D16 |
| PB09 | A3, D17 |
| PB16 | D1, TX |
| PB17 | D0, RX |
| PB22 | MISO, D23 |
| PB23 | MOSI, D24 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.