Board

Adafruit MONSTER M4SK specs, pinout & datasheets

Chip / SoC
ATSAMD51J19
CPU
Arm Cortex-M4
Clock
120 MHz

Imported entry: generated from open-source board definitions (platformio, circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Specifications

4 specs
Chip / SoC
ATSAMD51J19[1]
CPU
Arm Cortex-M4[1]
Clock
120 MHz[1]
Upload limits
496 KB flash, 192 KB RAM[1]

Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.

Can I still use it?

2 platforms
Arduino framework
Supported[1]Arduino framework available through PlatformIO.
CircuitPython
Supported[2]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Datasheets and documents

1 documents

Pinout

6 pins
Pin names in firmware (6 pins)
From the firmware’s board definition[3]
Chip pinBoard names
PA06RIGHT_TFT_CS
PA07RIGHT_TFT_DC
PA16MICROPHONE_CLOCK
PA17MICROPHONE_DATA
PB22LEFT_TFT_DC
PB23LEFT_TFT_CS

Sources

3 sources
  1. PlatformIO board definition (adafruit_monster_m4sk) at 602ea25c30
  2. CircuitPython board definition (monster_m4sk) at 83b54473a1
  3. CircuitPython pin definitions (monster_m4sk) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake