Feather RP2350 Adalogger specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (28 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | TX, D1 |
| GPIO1 | RX, D0 |
| GPIO2 | SDA |
| GPIO3 | SCL |
| GPIO4 | IO4, D12 |
| GPIO5 | D5 |
| GPIO6 | D6 |
| GPIO7 | LED, IO7, D13 |
| GPIO9 | D9 |
| GPIO10 | D10 |
| GPIO11 | D11 |
| GPIO13 | SD_CARD_DETECT |
| GPIO14 | SD_CLK |
| GPIO15 | SD_MOSI, SD_CMD |
| GPIO16 | SD_MISO, SD_DAT0 |
| GPIO17 | SD_DAT1 |
| GPIO18 | SD_DAT2 |
| GPIO19 | SD_CS, SD_DAT3 |
| GPIO20 | MISO |
| GPIO21 | NEOPIXEL |
| GPIO22 | SCK |
| GPIO23 | MOSI |
| GPIO24 | D24 |
| GPIO25 | D25 |
| GPIO26 | A0 |
| GPIO27 | A1 |
| GPIO28 | A2 |
| GPIO29 | A3 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.