MatrixPortal S3 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (13 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON, BOOT0, D0 |
| GPIO3 | A1 |
| GPIO4 | NEOPIXEL |
| GPIO8 | RX, D8 |
| GPIO9 | A2 |
| GPIO10 | A3 |
| GPIO11 | A4 |
| GPIO12 | A0 |
| GPIO13 | LED, D13, L |
| GPIO15 | ACCELEROMETER_INTERRUPT |
| GPIO16 | SDA, D16 |
| GPIO17 | SCL, D17 |
| GPIO18 | TX, D18 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.