Board

MEMENTO - Python Programmable DIY Camera specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

32 pins
Pin names in firmware (32 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON
GPIO1NEOPIXEL
GPIO2MIC
GPIO3IRQ
GPIO4BATTERY_MONITOR
GPIO5CAMERA_VSYNC
GPIO6CAMERA_HREF
GPIO7CAMERA_DATA9
GPIO8CAMERA_XCLK
GPIO9CAMERA_DATA8
GPIO10CAMERA_DATA7
GPIO11CAMERA_PCLK
GPIO12CAMERA_DATA6
GPIO13CAMERA_DATA2
GPIO14CAMERA_DATA5
GPIO15CAMERA_DATA3
GPIO16CAMERA_DATA4
GPIO17A0
GPIO18A1
GPIO21CAMERA_PWDN
GPIO33SCL
GPIO34SDA
GPIO35MOSI
GPIO36SCK
GPIO37MISO
GPIO38TFT_RESET
GPIO39TFT_CS
GPIO40TFT_DC
GPIO45TFT_BACKLIGHT
GPIO46SPEAKER
GPIO47CAMERA_RESET
GPIO48CARD_CS

Sources

2 sources
  1. CircuitPython board definition (adafruit_esp32s3_camera) at 83b54473a1
  2. CircuitPython pin definitions (adafruit_esp32s3_camera) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake