Adafruit QT Py ESP32-S3 8MB Flash No PSRAM specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (16 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON, D0 |
| GPIO5 | TX, A6, D5 |
| GPIO6 | SCL, A5, D6 |
| GPIO7 | SDA, A4, D7 |
| GPIO8 | A3, D8 |
| GPIO9 | A2, D9 |
| GPIO16 | RX, A7, D16 |
| GPIO17 | A1, D17 |
| GPIO18 | A0, D18 |
| GPIO35 | MOSI, D35 |
| GPIO36 | SCK, D36 |
| GPIO37 | MISO, D37 |
| GPIO38 | NEOPIXEL_POWER |
| GPIO39 | NEOPIXEL |
| GPIO40 | SCL1, D40 |
| GPIO41 | SDA1, D41 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.