Bee Data Logger specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (24 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BOOT_BTN |
| GPIO1 | BATTERY, VBAT, VBAT_SENSE, VOLTAGE_MONITOR |
| GPIO2 | VBUS_SENSE |
| GPIO3 | IO3, A3, D3 |
| GPIO4 | IO4, A4, D4 |
| GPIO5 | IO5, A5, D5 |
| GPIO6 | IO6, A6, D6 |
| GPIO7 | IO7, A7, D7 |
| GPIO8 | IO8, A8, D8 |
| GPIO9 | IO9, A9, D9 |
| GPIO34 | NEOPIXEL_POWER, LDO2 |
| GPIO36 | IO36, SCL, D36 |
| GPIO37 | IO37, SDA, D37 |
| GPIO38 | IO38, D38 |
| GPIO39 | IO39, D39 |
| GPIO40 | NEOPIXEL |
| GPIO41 | IO41, D41 |
| GPIO42 | IO42, D42 |
| GPIO43 | TX, D43, IO43 |
| GPIO44 | RX, IO44, D44 |
| GPIO45 | MISO |
| GPIO46 | MOSI |
| GPIO47 | SD_CS |
| GPIO48 | SCK, IO48 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.