ALPSTUGA Drop-In ESP32-S3 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (8 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON, BOOT0, D0 |
| GPIO3 | SDA, D3 |
| GPIO4 | SCL, D4 |
| GPIO5 | BUTTON_1, D5 |
| GPIO6 | BUTTON_2, D6 |
| GPIO8 | BUTTON_3, D8 |
| GPIO9 | LED, D9 |
| GPIO33 | NEOPIXEL |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.