Board

ES3ink specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

39 pins
Pin names in firmware (39 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON, IO0, BOOT0
GPIO1IO1
GPIO2IO2, VOLTAGE_MONITOR
GPIO3IO3, SDA
GPIO4IO4, SCL
GPIO5IO5, EPD_RESET
GPIO6IO6, EPD_BUSY
GPIO7IO7
GPIO8IO8, NEOPIXEL_POWER
GPIO9IO9, EPD_CS
GPIO10IO10, EPD_DC
GPIO11IO11, MOSI
GPIO12IO12, SCK
GPIO13IO13, MISO
GPIO14IO14
GPIO15IO15
GPIO16IO16
GPIO17IO17
GPIO18IO18, NEOPIXEL
GPIO19IO19
GPIO20IO20
GPIO21IO21
GPIO26IO26
GPIO33IO33
GPIO34IO34
GPIO35IO35
GPIO36IO36
GPIO37IO37
GPIO38IO38
GPIO39IO39
GPIO40IO40
GPIO41IO41
GPIO42IO42
GPIO43TX, IO43
GPIO44RX, IO44
GPIO45IO45
GPIO46IO46
GPIO47IO47
GPIO48IO48

Sources

2 sources
  1. CircuitPython board definition (es3ink) at 83b54473a1
  2. CircuitPython pin definitions (es3ink) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake