Board

Elecrow CrowPanel 4.2 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

33 pins
Pin names in firmware (33 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON_BOOT
GPIO1BUTTON_EXIT
GPIO2BUTTON_MENU
GPIO3IO3
GPIO4ROCKER_DOWN
GPIO5ROCKER_CLICK
GPIO6ROCKER_UP
GPIO7EPD_ENABLE
GPIO8IO8
GPIO9IO9
GPIO10TF_CS
GPIO11EPD_MOSI
GPIO12EPD_CLK
GPIO13TF_MISO
GPIO14IO14
GPIO15IO15
GPIO16IO16
GPIO17IO17
GPIO18IO18
GPIO19IO19
GPIO20IO20
GPIO21IO21
GPIO38IO38
GPIO39TF_CLK
GPIO40TF_MOSI
GPIO41LED
GPIO42TF_ENABLE
GPIO43TX
GPIO44RX
GPIO45EPD_CS
GPIO46EPD_DC
GPIO47EPD_RES
GPIO48EPD_BUSY

Sources

2 sources
  1. CircuitPython board definition (elecrow_crowpanel_4_2_epaper) at 83b54473a1
  2. CircuitPython pin definitions (elecrow_crowpanel_4_2_epaper) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake