Board

ESP32-S3 Box Lite specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

31 pins
Pin names in firmware (31 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BOOT
GPIO1MUTE_STATUS
GPIO2I2S_MCLK
GPIO3CTP_INT
GPIO4LCD_DC
GPIO5LCD_CS
GPIO6LCD_MOSI
GPIO7LCD_SCK
GPIO8SDA
GPIO9G9
GPIO10CS, G10
GPIO11MOSI, G11
GPIO12CLK, G12
GPIO13MISO, G13
GPIO14G14
GPIO15I2S_CODEC_DSDIN
GPIO16I2S_ADC_SDOUT
GPIO17I2S_SCLK
GPIO18SCL
GPIO21G21
GPIO38G38
GPIO39G39
GPIO40SCL2, G40
GPIO41SDA2, G41
GPIO42G42
GPIO43U0TXD, G43
GPIO44U0RXD, G44
GPIO45LCD_CTRL
GPIO46PA_CTRL
GPIO47I2S_LRCK
GPIO48LCD_RST

Sources

2 sources
  1. CircuitPython board definition (espressif_esp32s3_box_lite) at 83b54473a1
  2. CircuitPython pin definitions (espressif_esp32s3_box_lite) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake