ESP32-S3-USB-OTG-N8 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (26 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON_OK |
| GPIO1 | HOST_VOL |
| GPIO2 | BAT_VOL, BATTERY, VOLTAGE_MONITOR |
| GPIO4 | LCD_DC |
| GPIO5 | LCD_EN |
| GPIO6 | LCD_SCLK |
| GPIO7 | LCD_SDA |
| GPIO8 | LCD_RST |
| GPIO9 | LCD_BL |
| GPIO10 | BUTTON_UP |
| GPIO11 | BUTTON_DW, BUTTON_DOWN |
| GPIO12 | DEV_VBUS_EN |
| GPIO13 | BOOST_EN |
| GPIO14 | BUTTON_MENU |
| GPIO15 | LED_GREEN, LED |
| GPIO16 | LED_YELLOW |
| GPIO17 | LIMIT_EN |
| GPIO18 | USB_SEL |
| GPIO21 | OVER_CURRENT |
| GPIO33 | SD_D2 |
| GPIO34 | SD_D3 |
| GPIO36 | SD_SCK |
| GPIO37 | SD_D0 |
| GPIO38 | SD_D1 |
| GPIO43 | TX |
| GPIO44 | RX |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.