Board

ESP32-S3 HackTablet specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

36 pins
Pin names in firmware (36 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0
GPIO1IO1
GPIO2IO2
GPIO3IO3, TFTB1
GPIO4TFTB2
GPIO5TFTB3
GPIO6TFTB4
GPIO7TFTB5
GPIO8TFTG1
GPIO9TFTG2
GPIO10TFTG3
GPIO11TFTG4
GPIO12TFTG5
GPIO13TFTG6
GPIO14TFTR1
GPIO15TFTR2
GPIO16TFTR3
GPIO17TFTR4
GPIO18TFTR5
GPIO19IO19
GPIO20IO20
GPIO21dclk
GPIO35IO35
GPIO36IO36
GPIO37IO37
GPIO38IO38
GPIO39TFT_BACKLIGHT, IO39
GPIO40TOUCH_INT
GPIO41SCL
GPIO42SDA
GPIO43IO43, TX
GPIO44IO44, RX
GPIO45de
GPIO46IO46
GPIO47hsync
GPIO48vsync, NEOPIXEL

Sources

2 sources
  1. CircuitPython board definition (espressif_esp32s3_devkitc_1_n8r8_hacktablet) at 83b54473a1
  2. CircuitPython pin definitions (espressif_esp32s3_devkitc_1_n8r8_hacktablet) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake