T-Dongle S3 specs, pinout & datasheets
- Chip / SoC
- ESP32-S3
Imported entry: generated from open-source board definitions (zephyr, circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
- Chip / SoC
- ESP32-S3[1]
Can I still use it?
- CircuitPython
- Supported[2]
- Zephyr RTOS
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (17 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | IO0, BUTTON0 |
| GPIO1 | IO1, LCD_RST |
| GPIO2 | IO2, LCD_DC |
| GPIO3 | IO3, LCD_DIN |
| GPIO4 | IO4, LCD_CS |
| GPIO5 | IO5, LCD_CLK |
| GPIO12 | IO12, SD_SCK |
| GPIO14 | IO14, SD_D0 |
| GPIO16 | IO16, SD_CMD |
| GPIO17 | IO17, SD_D1 |
| GPIO18 | IO18, SD_D3 |
| GPIO21 | IO21, SD_D2 |
| GPIO38 | IO38, LCD_BCKL |
| GPIO39 | IO39, APA102_CLK |
| GPIO40 | IO40, APA102_DI |
| GPIO43 | IO43, TX, STEMMA_SDA |
| GPIO44 | IO44, RX, STEMMA_SCL |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.