TQ-T Pro (with PSRAM) specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (21 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON0, IO0 |
| GPIO1 | LCD_RST |
| GPIO2 | LCD_MOSI |
| GPIO3 | LCD_CLK |
| GPIO5 | LCD_CS |
| GPIO6 | LCD_DC |
| GPIO10 | LCD_BCKL |
| GPIO16 | IO16 |
| GPIO17 | IO17 |
| GPIO18 | IO18 |
| GPIO33 | IO33 |
| GPIO34 | IO34 |
| GPIO35 | IO35 |
| GPIO36 | IO36 |
| GPIO37 | IO37 |
| GPIO38 | IO38 |
| GPIO39 | IO39 |
| GPIO43 | IO43, SDA |
| GPIO44 | IO44, SCL |
| GPIO47 | BUTTON1, IO47 |
| GPIO48 | IO48 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.