LOLIN S3 MINI PRO specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (24 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BOOT, BUTTON0 |
| GPIO7 | NEOPIXEL_ENABLE |
| GPIO8 | NEOPIXEL |
| GPIO9 | IR_LED |
| GPIO11 | SCL, IO11 |
| GPIO12 | SDA, IO12 |
| GPIO13 | IO13 |
| GPIO14 | IO14 |
| GPIO18 | IMU_INT1 |
| GPIO21 | IMU_INT2 |
| GPIO33 | TFT_BACKLIGHT |
| GPIO34 | TFT_RES |
| GPIO35 | TFT_CS |
| GPIO36 | TFT_DC |
| GPIO37 | IO37 |
| GPIO38 | MISO, IO38 |
| GPIO39 | MOSI, IO39 |
| GPIO40 | CLK, IO40 |
| GPIO41 | IO41 |
| GPIO42 | IO42 |
| GPIO43 | IO43, TX |
| GPIO44 | IO44, RX |
| GPIO47 | BUTTON1 |
| GPIO48 | BUTTON2 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.