Board

M5Stack CardPuter - M5StampS3 powered mini computer specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

30 pins
Pin names in firmware (30 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON, BOOT0
GPIO1TX, PORTA1, D1, G1
GPIO2RX, PORTA2, D2, G2
GPIO3KB_COL_2
GPIO4KB_COL_3
GPIO5KB_COL_4
GPIO6KB_COL_5
GPIO7KB_COL_6
GPIO8KB_A_0
GPIO9KB_A_1
GPIO10BAT_ADC
GPIO11KB_A_2
GPIO12SD_CS
GPIO13KB_COL_0
GPIO14SD_MOSI
GPIO15KB_COL_1
GPIO21NEOPIXEL
GPIO33TFT_RST, TFT_RESET
GPIO34TFT_DC, TFT_RS
GPIO35TFT_MOSI, TFT_DATA
GPIO36TFT_SCK
GPIO37TFT_CS
GPIO38TFT_BACKLIGHT, TFT_BL
GPIO39SD_MISO
GPIO40SD_SCK
GPIO41I2S_BIT_CLOCK
GPIO42I2S_DATA
GPIO43I2S_WORD_SELECT, MIC_CLK
GPIO44IR_TX
GPIO46MIC_DATA

Sources

2 sources
  1. CircuitPython board definition (m5stack_cardputer) at 83b54473a1
  2. CircuitPython pin definitions (m5stack_cardputer) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake