Board

CoreS3 SE ESP32S3 IoT specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

24 pins
Pin names in firmware (24 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0I2S_MASTER_CLOCK, BOOT0
GPIO1PORTA_SCL, D1
GPIO2PORTA_SDA, D2, A2
GPIO3TFT_CS
GPIO4SDCARD_CS
GPIO5NEOPIXEL, D5, A5
GPIO6D6, A6
GPIO7IR, D7, A7
GPIO8PORTB_IN, D8, A8
GPIO9PORTB_OUT, D9, A9
GPIO11SCL
GPIO12SDA
GPIO13I2S_DATA_OUT
GPIO14I2S_DATA_IN
GPIO17PORTC_TX, D17, A17
GPIO18PORTC_RX, D18, A18
GPIO21I2C_INTERRUPT
GPIO33I2S_WORD_SELECT
GPIO34I2S_BIT_CLOCK
GPIO35TFT_DC
GPIO36TFT_SCK
GPIO37TFT_MOSI
GPIO43TX, D43
GPIO44RX, D44

Sources

2 sources
  1. CircuitPython board definition (m5stack_cores3_se) at 83b54473a1
  2. CircuitPython pin definitions (m5stack_cores3_se) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake